15
14
MMooiissttuurree--CCoonnttrroolllleedd PPrroodduuccee DDrraawweerr((ss))
The moisture control on the produce drawer gives you the ability to
change the amount of moisture or humidity in the produce drawer.
The clear top section allows you to see into the drawer without
opening it.
The moisture control is located underneath the front trim. Slide the
control to a higher setting for storing deli items and produce with
leaves such as lettuce, spinach, or cabbage. Slide the control to a
lower setting for storing fruits and vegetables with skins such as apples,
corn, or tomatoes. See “Food Storage Guide” (pg.26) for more
information on storing foods properly.
MMOOIISSTTUURREE CCOONNTTRROOLL
LLOOWW HHIIGGHH
DDaaiirryy CCoommppaarrttmmeennttss
Dairy compartment doors are surrounded by gaskets for a tighter seal
which allow items to stay fresh longer. Dairy compartments also adjust
to meet individual storage needs.
To remove:
1. Grasp dairy compartment.
2. Lift compartment up and pull out.
To replace:
1. Place dairy compartment over glides in
refrigerator door.
2. Push compartment down to lock into place.
CChhiillll ZZoonnee
The Chill Zone features the MEAT SAVOR™/PRODUCE drawer. Air
circulating in the Chill Zone is contained by an airduct above the
drawer. This drawer keeps food up to 3 - 5
0
F (-16 - -31
0
C) colder than
the average refrigerator temperature. The temperature control is
located to the right of the MEAT SAVOR™/PRODUCE drawer. The
control adjusts amount of air circulating in this area. Slide control down
for normal refrigerator temperature and up for colder temperatures.
The uppermost position is Quick Chill. This can be used to quickly chill
foods and beverages.
MMEEAATT SSAAVVOORR™™//PPRROODDUUCCEE DDrraawweerr
As the MEAT SAVOR™/PRODUCE drawer glides forward on an inner
and outer track, the lid raises for easy access of items. To open, grasp
the drawer on the molded handle/s and pull
forward. The MEAT SAVOR™/PRODUCE
drawer holds extra-large deli trays, wine
bottles, etc. The lid can also be removed
and the drawer repositioned for tall items
such as tiered cakes, flower
arrangements, etc.
Lid
Molded
handle
RReemmoovviinngg MMeeaattSSaavvoorr
TTMM
//PPrroodduuccee DDrraawweerr
1. To remove, roll drawer out to the stop.
2. Remove drawer by lifting up on the handle/s molded into the
drawer.
3. Pull drawer out the rest of the way.
4. To replace, extend glides out to the
stop.
5. Place the drawer onto the glides and
push back until drawer engages.
6. Lower front part of drawer, grasp
glides/drawer and lightly squeeze
until drawer is level.
7. Slide drawer back until it stops.
Handle
Glides
Comentários a estes Manuais