Viking MAC OS Guia do Utilizador descarregar pdf (Página 24)

VIKING COMPONENTS 33.6K/56K PC CARD USER’S GUIDE

Windows CE

1. Once the modem is inserted into the PC Card slot, a window will appear with a

message like “PC Card Detected in Slot 1.” If you are running on battery power, it

will ask you if wish to continue using battery power. Click on the “Ye s” button.

2. The modem can be verified by clicking on the “Start” button. Then select

“Settings/Control Panel/System.” Under the “General” tab in the “System” section,

the Viking PC Card modem should be listed next to “Expansion Slot.”

3. After verifying your Viking PC Card modem has been correctly installed, you will

need to create a new “Dial-up Connection.” From the “Start” button, select

“Programs/Communication/Remote Networking.”

4. Select “Dial-up Connection” and type in a connection name. Then click on the

“Next” button.

5. Select “Viking Modem” on the drop down menu. Then click “Configure.” Under

the “Port Settings” tab, make the appropriate changes needed for your ISP

(Internet Service Provider).

Note: The baud rate should be changed to 115200, under “Connection

Preferences.” Then click on the “OK” button.

6. Click on the “TCP/IP Settings.” Make the appropriate changes needed for your

ISP. Then click on the “OK” button.

7. Click on the “Next” button and complete the necessary information.

Your installation is now complete.

Note: For cellular phone connectivity, please contact Viking technical support,

page 47.

Chapter 3

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 52 53

Sem comentários

Viking MAC OS Guia do Utilizador Página 24